How Long After Scotts Weed And Feed Can I Seed

ILGM

Buy Cannabis Seeds Online

Will Weed and Feed Kill Grass Seed? When to Plant and Spray Many gardeners often find themselves unsure of how long they’re supposed to wait until they can apply weed and feed to their lawns Can I Put Down Scotts Super Turf Builder Plus 2 If I Overseeded Four Weeks Ago?. A well-kept, healthy lawn should be plush, free of weeds and diseases, and as green as the neighbors’ envious hearts. Weed and feed products are designed to provide needed nutrients to the grass while poisoning weeds that want to … Garden Guides is the ultimate resource for cultivating your green thumb.

Will Weed and Feed Kill Grass Seed? When to Plant and Spray

Many gardeners often find themselves unsure of how long they’re supposed to wait until they can apply weed and feed to their lawns after planting grass seed. Conversely, the issue may be how long one’s supposed to wait to plant grass seed after spraying weed and feed. For both concerns, the answer largely revolves around the type of herbicides found in different weed and feed products.

Can you put weed and feed on grass seed?

You may be having an irresistible urge to spray weed and feed on your recently overseeded turf after spotting one or two weeds sprouting on the lawn. However, the growing seedlings will not be able to survive the strength of the herbicide. If you’re planning to use a weed and feed product with a post-emergent herbicide on your growing turf, wait until the grass roots anchor deeper into the soil and the lawn is established.

Also, some weed and feed products are non-selective, pre-emergent herbicides targeted at preventing weed seeds from sprouting. As such, when they’re applied on a recently seeded lawn even before the grass seeds germinate, they’ll kill the weed seeds as well as the grass seeds.

To control weeds on lawns before the new grass is established, consider alternative measures like spot treatments. You can also manually uproot the weed plants if the infestation is still in the early stages.

Mowing also helps to control weed growth in newly-established lawns, as the grass grows stronger and crowds out more weeds. In fact, it’s advisable to refrain from spraying weed and feed on your new turf until after the third mowing. By then, the grass will be strong enough to withstand herbicides.

However, even then, you should only use a post-emergent, selective weed and feed product. These will easily kill broadleaf weeds like dandelions and clover without harming your turfgrass. Pre-emergent herbicides won’t work on already existing weed plants, while non-selective/systemic herbicides will kill both the weeds and your growing turfgrass.

When to plant grass seed after weed and feed?

The best time to plant grass seed after applying weed and feed depends on whether the weed and feed used contained a pre-emergent or post-emergent herbicide. For weed and feed products containing post-emergent, systemic weed killers, you can plant grass seed as soon as two weeks after application.

That’s because systemic herbicides don’t leave any residue in the soil that might harm seeds grown a few days after. They’re instead absorbed into plants via the leaves and roots, killing the whole plant within 7 days. Common examples of systemic herbicides include glyphosate and pelargonic acid.

Pre-emergent herbicides, on the other hand, are formulated to inhibit seed germination by forming a chemical barricade atop the soil. Thus, if you plant your grass seed soon after applying a weed and feed with a pre-emergent herbicide, they won’t sprout as the herbicide will still be in the soil.

See also  Cannabis Seed Germination Cup Of Water

To seed your lawn after using a pre-emergent weed and feed, you may have to wait between 1-6 months, with 2 months being the average wait time. This is due to the wide variation in the duration it takes for different types of pre-emergent herbicides to degrade in the soil. A herbicide like 2,4-D decays in as soon as four weeks, but you may have to wait for six months to plant grass seed on a lawn treated with Atrazine herbicide.

Take note, though, that there are some types of weed and feed products that can be used to suppress weed seeds without affecting grass seed. These products usually contain siduron, a pre-emergent herbicide that also boosts germination of grass seed. If your pre-emergent weed and feed contains siduron as the primary active ingredient, you can sow grass seed right after application.

Note: Always read the labelling on your weed and feed for information on how long you should wait to plant grass seed post-application. The types of herbicides infused into the product usually determines the manufacturers’ wait time recommendations.

How long after seeding can you spray for weeds?

It’s not uncommon to find weeds sprouting and growing on your lawn alongside your new grass seedlings. The right time to spray selective weed and feed on your lawn after seeding is after mowing three times. At this stage, the grass is mature enough to withstand the harsh chemical herbicides inside the weed and feed.

You can also spray a pre-emergent weed killer if the weed infestation is still in the earlier stages. When you start to notice weeds on your new turf, it’s a sign that more weed seeds are present in the ground and are about to germinate.

You should spray a pre-emergent at least 14 days after seeding, after the grass seeds have germinated into seedlings. As such, you’ll be targeting only the weed seeds that haven’t yet sprouted, and not your grass seeds.

Note: Never use a non-selective weed killer on your new lawn, no matter how mature the grass looks, as it will kill all plants it comes into contact with including the grass.

Weed Control Tips after Seeding a Lawn

You can keep weeds out of your lawn after seeding by adopting the proper watering, fertilizing, and mowing practices. Doing so helps your turf grow stronger and stay healthy enough to choke out weeds.

Can I Put Down Scotts Super Turf Builder Plus 2 If I Overseeded Four Weeks Ago?

A well-kept, healthy lawn should be plush, free of weeds and diseases, and as green as the neighbors’ envious hearts. Weed and feed products are designed to provide needed nutrients to the grass while poisoning weeds that want to steal the lawn’s food. Scotts Super Turf Builder with Plus 2 Weed Control works on several species of lawn grasses. While the company’s website recommends waiting four weeks to put down grass seed after applying the weed and feed, seeding first means waiting a different length of time before you use the product.

Healthy Lawn Chemistry

Scotts Super Turf Builder with Plus 2 Weed Control, now called simply Super Turf Builder with Weed and Feed, contains more nitrogen and phosphorus than plain Turf Builder Weed and Feed, to provide faster green-up. Super Turf Builder contains 29 percent nitrogen, 2 percent phosphorus and 3 percent potassium, while plain Turf Builder contains 28 percent nitrogen, no phosphorus and 3 percent potassium. The active weed-killing ingredients are 2,4-D and mecoprop. Environmental health agencies in some areas list 2,4-D as a chemical known to cause cancer or birth defects, so use with caution.

See also  Germinate Weed Seeds In Water Cup

If you are unable to find Super Turf Builder Weed and Feed, Scotts Turf Builder Triple Action provides similar results. It kills weeds, prevents the new weeds from sprouting and feeds the grass.

Timing Is Everything

The Scotts website question-and-answer section states that grass seeds should be allowed to germinate and grow tall and strong enough to be mowed four times before you apply weed and feed. No entirely specific time period is provided, because different grass species grow at different rates, and growth is affected by many variables, including soil quality, temperature and rainfall or manual irrigation.

The Nitty Gritty

This turf builder weed and feed should be applied with a mechanical spreader for even distribution. When using a spreader, Scotts Turf Builder Plus 2 spreader settings vary depending on the device. Set broadcast and rotary spreaders at 3.5, hand-held spreaders on 3 and drop spreaders on 5. Even if you’ve used the turf builder products for years, always check the package directions to ensure that the instructions haven’t changed.

Before applying any fertilizer or herbicide product, put on a mask, safety goggles, gloves, long sleeves, long pants and closed toe shoes. After applying the weed and feed and cleaning the spreader, wash your clothing in hot water and detergent to remove any dust or residue.

Wait for a calm day when temperatures are not expected to rise above 90 degrees Fahrenheit and no rainfall is expected for at least 24 hours. Water the lawn first to moisten the grass, or start the application when the grass is moist from dew. The product should be applied while weeds are actively growing in the lawn. A second application may be made, but wait at least 30 days — and do not use the product more than twice each year.

Scotts Turf Builder Plus 2 Liquid

If you have a very small lawn, an alternative to the granular Scotts weed and feed products is the Scotts Liquid Turf Builder with Plus 2 Weed Control. This liquid fertilizer provides a quick boost of nitrogen as well as killing clover, dandelions and other weeds. Simply attach the garden hose and spray the lawn when the weeds are actively growing.

Use It Carefully

Make sure the product does not spill or drift on the wind to desirable plants, and don’t use it within several feet of fruit or vegetable plants. Sweep up any fertilizer that drifts onto sidewalks or driveways and toss it back onto the lawn.

Do not apply on St. Augustine grass, including the Floratam variety. St. Augustine grasses (Stenotaphrum secundatum) grow best in U.S. Department of Agriculture plant hardiness zones 8 through 10. The product is not appropriate for carpet grass (Axonopus affinis), which thrives in USDA zones 9 through 10, or dichondra (Dichondra spp.), a creeping ground cover often used in place of standard lawn grass in USDA zones 7 through 11.

See also  Weed Defense Grass Seed

How Many Days Do You Have to Wait Before Seeding After Weed & Feed?

You want a beautiful lawn for your family to enjoy, but it’s no longer enough to just mow it. You have to fertilize, water, kill weeds and then reseed any bare spots. Using a weed and feed product saved you some time, so now you’re ready to plant some grass seed. You may have to wait a bit longer, though, depending on the type of weed and feed product you used.

Weed and Feed

Weed and feed products consist of fertilizers such as nitrogen or potassium, and a pre-emergent or post-emergent herbicide. If the weed and feed is designed for spring application, it contains a pre-emergent. If it is designed for later in the growing season, it incorporates a post-emergent herbicide. Knowing which one you are using is important because the herbicides affect plants in significantly different ways.

  • You want a beautiful lawn for your family to enjoy, but it’s no longer enough to just mow it.
  • Using a weed and feed product saved you some time, so now you’re ready to plant some grass seed.

How They Work

Pre-emergent weed and feed is applied in early spring so the herbicide is in place before the undesirable weeds germinate. Pre-emergent herbicide works by inhibiting germination. It must be watered with at least one-half inch of water to move the chemical from the surface into the soil. Post-emergent herbicides, however, must be applied while the weeds are actively growing because for the chemical to work, the herbicide must be absorbed into the plant.

Why You Wait

Since weed and feed products are designed to prevent germination — or to eradicate a living plant — they can, for the most part, have a similar effect on young turf grass. The only exception is the pre-emergent herbicide siduron, which is actually used to assist in seed germination. When using a pre-emergent that does not contain siduron, wait a minimum of two months before seeding. If using a product designed for broadleaf weeds, read the label carefully, because the active ingredient in these post-emergent herbicides have a wider range for the waiting period. Grass can be planted in as little as one month after application for products using 2,4-D to as much as six months for atrazine-based products.

  • Pre-emergent weed and feed is applied in early spring so the herbicide is in place before the undesirable weeds germinate.
  • Post-emergent herbicides, however, must be applied while the weeds are actively growing because for the chemical to work, the herbicide must be absorbed into the plant.

Proper Seeding Methods

When you are ready to seed your lawn, use a garden rake to remove debris and to break up the surface to ensure the seed comes into contact with the soil. Broadcast the seeds in two directions to ensure complete coverage, and water the ground lightly and often for up to two weeks — keeping the soil moist. Once seedlings have established, gradually reduce the frequency of the watering, but lengthen the amount of time per watering. This will encourage a deep root system for your grass.

How useful was this post?

Click on a star to rate it!

Average rating 5 / 5. Vote count: 1

No votes so far! Be the first to rate this post.